Maximum output signal: X.XX dBm
Impedance: 32 ohms
Sensitivity: -38 dB ± 3 dB (@1 kHz)
Charging time: 3 hours
*(Battery life at medium volume level. Higher volume means higher battery consumption)
To turn on your Energy Headphones 2 Bluetooth, press and hold the multifunction button (3) for 2 seconds. You will hear a confirmation sound and the status indicator (4) will glow blue. The status indicator (4) will keep flashing blue while your Energy Headphones 2 Bluetooth are on. To turn off your Energy Headphones 2 Bluetooth, press and hold the multifunction button (3) for 2 seconds. You will hear a sound when turning off the headphones.
When the battery level is below 10%, the indicator (4) will flash red and you will hear a sound to remind you to charge the battery.
The status indicator (4) will glow red while charging the device and will turn blue once the charging process has been completed. Connect the microUSB end of the USB cable provided to the CHARGING PORT (5) of your headphones and the other USB end to any device with an USB charging port that provides energy (PC, USB wall charger, car charger, etc) to charge the battery. The charging time is approximately 3 hours.
Once your Energy Headphones 2 Bluetooth are off, press and hold the multifunction button (3) for approximately 2 seconds, until the status indicator (4) starts flashing blue and red. At this point, your headphones and your Bluetooth device can be paired. Once "Energy Headphones 2" appears on your devide screen, press "connect". You will hear a sound that confirms that both devices have been paired correctly.
If you previously paired your Headphones 2 with your music player, they will connect automatically next time. If you want to synchronize them again, press the multifunction button (3) twice. You will hear a confirmation sound and the lights will flash red and blue. At this point, your device can be paired once again.
In order to optimize battery life, your Energy Headphones 2 Bluetooth will automatically turn off in the following situations:
Once your Energy Headphones 2 Bluetooth are syncronized, you will be able to control basic playback functions such as turning up and down the volume and switching to the next or previous track directly from your headphones.
Press the VOLUME + (1) and VOLUME - (2) buttons to turn up and down the volume respectively. You will hear a sound when reaching the maximum and minimum volume levels.
Press and hold the NEXT button (1) to switch to the next song. You can also press and hold the BACK button (2) to go back to the previous song.
Press the MULTIFUNCTION button (3) once to pause or resume playback.
Once your Energy Headphones 2 Bluetooth and smartphone are synchronized, you will be able to answer calls thanks to the built-in microphone (7) while wearing your headphones.
Press the MULTIFUNCTION button (3) to answer an incoming call. If you are listening to music when you receive a call, playback will pause and you will hear an incoming call sound. You can also press and hold this button for 2 seconds to reject an incoming call.
Press the MULTIFUNCTION button (3) again to end a call. Playback will resume from the point when the music stopped.
If you don't want to use the Bluetooth connection, you can also connect your Energy Headphones 2 Bluetooth to your music player using the audio cable provided. You don't need to switch on your headphones if you want to use this mode.
Simply connect one cable end to the AUDIO INPUT (6) and the other end to your music player to enable this mode.
Energy Sistem Technology, S.A. is liable for any lack of conformity that exists at the time the goods are purchased during a period of 36 months. Batteries are excluded from the 36 month warranty, having a warranty period of 24 months. This warranty covers any defects in workmanship or materials and does not cover any product failure due to accidents, misuse or alteration made by an unauthorized person.
The special 36 month warranty is valid for the European Union. For other countries please refer to your specific legislation or your local distributor.
Please visit www.energysistem.com/en/support and select your product to view the FAQ (Frequently Asked Questions), user manual, quick guide, drivers and updates available as well as to submit a query to our Technical Support or manage the warranty. You may also contact the distributor that sold the product by presenting the purchase receipt or invoice.
All company, brand and product names are trademarks or registered trademarks of their respective companies. Specifications are subject to change without notice.
© 2018 by Energy Sistem Technology, S.A. All rights reserved.
Issuer’s name: Energy Sistem Technology, S.A.
Address: C/ Calpe, 1 - 03509 Finestrat, Alicante (Spain)
Tel: +34 966 830 324
We declare under our own exclusive responsibility that the product:
referred to in this declaration is in compliance with the essential norms and standards
EN301 489-1 V2.2.0
EN301 469-17 V2.2.0
EN300 328 V2.1.1
in conformity with the provisions of the Directive 2014/53/EU of the European Parliament and of the Council of 16th April 2014.
Finestrat, 10th January 2018
Marco Antonio Velázquez Fierro
Product Management Director